Рассылка пришла, кое что полезное в ней:
Camera settings: EOS Error codes and messages
http://cpn.canon-europe.com/content/edu ... Newsletter Err 01
Description: The communication between the camera and lens is faulty.
Resolution: Very gently clean the electrical contacts (highlighted in red) on the camera and the lens using a clean and dry cloth.
CAUTION
When cleaning the contacts take the following precautions:
Do not wipe the contacts with a wet cloth.
Do not touch the contacts directly with your hands. Touching them with your hands could cause corrosion, which would cause the camera to become inoperable.
When cleaning the contacts on the lens side, be careful not to damage the lens surface.
Err 02
Description: The camera cannot access the memory card.
Resolution:
Remove and re-install the memory card.
Format the memory card as described in the user manual. The user manual for your EOS camera can be downloaded by clicking here for the Canon Europe EOS camera support page.
If formatting the memory card does not resolve the error please replace the memory card.
Err 03
Description: There are too many folders on the memory card.
Resolution: Replace the memory card with a formatted Compact Flash memory card.
rr 04
Description: Images cannot be saved because the memory card is full.
Resolution:
Erase any unnecessary images on the memory card.
Format the memory card as described in the user manual. The user manual for your EOS camera can be downloaded by clicking here for the Canon Europe EOS camera support page.
If formatting the memory card does not resolve the error please replace the memory card.
Err 05
Description: The built-in flash could not be raised.
Resolution: Turn the power switch off and then on again.
Err 06
Description: The sensor cleaning is not possible.
Resolution: Turn the power switch off and then on again.
Err 10
Description: A malfunction with the files on the memory card has been detected.
Resolution: Turn the power off, then remove and re-install the battery. Then turn the power on again.
Err 20
Description: A malfunction with the mechanical mechanism has been detected.
Resolution: Turn the power off, then remove and re-install the battery. Then turn the power on again.
Err 30
Description: A malfunction with the shutter has been detected.
Resolution: Turn the power off, then remove and re-install the battery. Then turn the power on again.
Err 40
Description: A malfunction with the power source has been detected.
Resolution: Turn the power off, then remove and re-install the battery. Then turn the power on again.
Err 50
Description: A malfunction related to the electric control has been detected.
Resolution: Turn the power off, then remove and re-install the battery. Then turn the power on again.
Err 60
Description: An error occurred preventing shooting, the lens movement may be obstructed.
Resolution: Check that the lens is clear from obstructions. Then turn the power switch off and then back on again.
Err 70
Description: A malfunction with the images has been detected.
Resolution: Turn the power off, then remove and re-install the battery. Then turn the power on again.
Err 80
Description: A malfunction with the electric control or images has been detected.
Resolution: Turn the power off, then remove and re-install the battery. Then turn the power on again.
может надо было отдельную тему?